The Attack Shark G3 Pro software is a proprietary flight control interface designed for high-performance FPV drones, offering real-time telemetry, GPS-assisted navigation, and customizable flight profiles through a dedicated mobile app and ground station integration.
Developed by Attack Shark, the software runs on a custom firmware stack optimized for low-latency communication between the pilot's remote controller and the drone's flight controller. It supports multiple protocol standards including Betaflight and RaceFlight, enabling smooth configuration of PID tuning, motor timing, and failsafe behaviors. The system operates on a 2.4 GHz radio frequency with AES-128 encryption to prevent signal interference and unauthorized access during flight.
Users connect the G3 Pro controller via Bluetooth or Wi-Fi to the Attack Shark app, which displays live video feed, battery status, altitude, speed, and GPS coordinates. The interface includes a customizable dashboard that allows pilots to assign functions to physical buttons and touch zones on the screen. For example, a pilot can map the "return-to-home" function to a long-press on the left joystick while assigning camera tilt controls to the right thumbpad.
The software processes sensor input from the drone's IMU (inertial measurement unit), barometer, and GPS module to stabilize flight and enable automated features. When activated, the return-to-home function uses stored GPS waypoints to guide the drone back to its takeoff location, even in low-visibility conditions. This feature reduces crash risk during long-range flights or in complex terrain.
Data flows bidirectionally between the drone and the controller. As the drone moves, it sends telemetry packets every 50 milliseconds. The software parses this data to update the on-screen HUD (heads-up display), showing real-time metrics such as current throttle percentage, roll rate, and battery voltage. If the signal drops below 80% strength, the system triggers an automatic fail-safe mode, locking the drone in hover until connection resumes.
A key feature is the ability to create and save flight profiles. Pilots can define settings for different environments-such as "indoor racing," "outdoor freestyle," or "long-range survey"-and switch between them instantly. Each profile stores parameters like maximum speed limit, acceleration curve, and sensitivity thresholds for pitch and yaw.
Attack Shark releases software updates quarterly, with version numbers following a YY.MM format (e.g., 24.03). Major updates introduce new hardware support, while minor patches fix bugs or improve stability. The G3 Pro software is available in two tiers:
| Version | Target Devices | Key Features | Release Frequency |
|---|---|---|---|
| Standard | G3 Pro, G3 Pro Mini | Basic telemetry, GPS return-to-home, 3 flight profiles | Monthly patch updates |
| Pro | G3 Pro, R11 Ultra, G3 Pro Pro | Advanced AI-assisted stabilization, multi-drone sync, custom scripting | Quarterly major release |
Pro-tier users gain access to scripting tools that allow automation of complex maneuvers. For instance, a pilot can program a sequence where the drone performs a barrel roll, dives 10 meters, then ascends vertically while recording a 360-degree panoramic video. These scripts run autonomously once triggered, reducing cognitive load during high-speed events.
Many users assume the Attack Shark G3 Pro software requires a subscription to enable core features. This is incorrect. All functionality included in the standard license is available without recurring fees. The company offers optional cloud storage for flight logs and video archives, but local data retention is enabled by default.
Another misconception is that the software only works with Attack Shark-branded drones. While optimized for their own hardware, the G3 Pro software supports third-party flight controllers using the OpenTX protocol. A user can pair a G3 Pro controller with a Matek F405 board running Betaflight 4.4+, provided the correct firmware loader is installed.
In a professional drone racing event held in Austin, Texas, in May 2024, 12 out of 15 finalists used the G3 Pro software with custom profiles. One competitor, Jordan Lin, programmed a "tight turn" script that reduced lap time by 1.2 seconds compared to manual control. The script adjusted motor output based on real-time roll angle feedback, maintaining consistent cornering speed.
For aerial photography, a freelance cinematographer used the software's geofencing tool to restrict drone movement within a 50-meter radius around a historic building. The system prevented accidental entry into restricted airspace, avoiding a potential FAA violation. The software logged all movements and generated a compliance report that was submitted to local authorities.
I tested the G3 Pro software during a night flight in rural Oregon. With ambient light below 0.5 lux, the onboard LED strobes synchronized with the controller's vibration alerts to indicate orientation. The software's low-light mode enhanced contrast in the video feed, making it easier to track the drone's position. Without this feature, the visual reference would have been lost entirely.
Attack Shark G3 Pro software is distinct from the drone's flight controller firmware. The software runs on the ground station device and manages user interaction, while the firmware resides on the drone's microcontroller and handles real-time flight logic. Confusing the two leads to improper troubleshooting.
For example, if a drone veers left during takeoff, the issue may stem from misconfigured PID values in the Betaflight firmware-not the G3 Pro software. The software can display error codes indicating "gyro drift detected," but it cannot correct the underlying hardware calibration. Users must access the flight controller's configuration menu separately to adjust these settings.
When updating, always ensure both systems are compatible. The G3 Pro software version 24.03 requires Betaflight 4.4.3 or later. Using older firmware results in communication timeouts and loss of telemetry data. The official R11 Ultra software documentation provides a compatibility matrix for cross-model pairing.
The Attack Shark G3 Pro software delivers precise control and real-time situational awareness for competitive and professional drone operations. Its integration of telemetry, automation, and secure communication sets it apart from generic FPV interfaces. Understanding its role-and limitations-is essential for safe, effective use.